Temporary Power Distribution Centers

"G" Series GFCI Protected Boxes

CEP's "G" Series Portable Power Distribution Centers have been engineered utilizing the latest in GFCI technology, providing the user with the highest level of electrical safety. These power distribution centers are protected by a GFCI module giving the user open neutral and reverse phasing protection. They are U.L. Listed for outdoor use and designed to stand up to the tougest of jobsite conditions. Each unit has been carefully assembled to provide the ultimate in electrical safety as well as meeting current OSHA standards.

GFCI's provide open neutral and reverse phasing protection
"Power On" indicator lights on GFCI's
220V High Voltage Shut-Off with indicator light
1 - 50 AMP 125/250 Volt feed through receptacle
1 - 30 Amp 250 Volt non-GFCI receptacle
6 - 20 Amp 125 Volt GFCI individually protected receptacles

Specifications
Input current: 50 amp 1 phase 125/250 volt A.C. 3 pole 4 wire. Trip Level: 4-6 milliamps. Trip Time: Less than .025 seconds nominal. Chassis: 16 gauge steel. Top: 14 gauge steel. Legs: 10 gauge steel. Finish: 3 mils U.L. listed polyester powder coat. Dimensions: W=14.5" L=21" H=11".

Model No.	Rating	Power Inlet	Power Outlet	Receptacles		GFI	Overload Protected	Weight
Model No.	Rating	Power Inlet	Power Outlet	Qty	Type	GFI	Overload Protected	Weight
8706G	U.L. Listed	CS6375	CS6369	6	L5-20R	Yes	Yes	35
6506G	50 Amp 125/250 Volt	CS6375	CS6369	1	L6-30R	No	Yes	29
8706GU*	U.L. Listed	CS6375	CS6369	6	L5-20R	Yes	Yes	34
6506GU*	50 Amp 125/250 Volt	CS6375	CS6369	1	L6-30R	No	Yes	28
* U designates straight blade 20A 125V receptacles

3 Phase Distribution Panels

These heavy-duty 3 phase power distribution carts are designed to breakdown 3 phase 120/208V power into 208V 3 phase, 250V single phase and/or 125V single-phase power. The power supply input may be a direct wire feed, 100A pin and sleeve, or cam type devices. Either a large generator or another large power source may power them. These panels may be designed to act as the feeder for the smaller spider type boxes or wired for powering large equipment. The cart is made of heavy gauge tube steel and provides an easy means of transportation as well as protection for the enclosure. The enclosure is custom built from 16 gauge sheet metal. 100A, 200A, 400A and special configurations are available upon request.

Heavy Duty Cart
Clear Breaker Panel Window
Easily Stackable
GFCI Protection Available
3R and 4X Available
Stainless Steel 16ga. Enclosure

Model No.	Main Breaker Rating/Input Type	Output Receptacles			Approx Wt.
Model No.	Main Breaker Rating/Input Type	Qty	Nema#	Amp/Volt Rating	Approx Wt.
6210DC	100 Amp 120/208V	10	5-20R	20 Amp 125V Straight GCFI	137
6210DC	Direct Wire	2	L6-30R	30 Amp 250V Twist
6211DC	100 Amp 120/208V	4	L21-20R	20 Amp 120/208V Twist	105
6211DC	Direct Wire	2	5-20R	20 Amp 125V Straight GCFI
6220CC	200 Amp 120/208V	6	CS6364	50 Amp 125/250V Twist	136
	Cam Type	2	L6-30	30 Amp 250V Twist
		2	L5-20	20 Amp 125V Twist GCFI
6221CC	200 Amp 120/208V	8	L21-20	20 Amp 120/208V	136
6221CC	Cam Type	2	5-20R	20 Amp 125V Straight GCFI
6240CC	400 Amp 120/208V	8	Pin/Sleeve	60 Amp 125/250V	140
6240CC	Cam Type	2	5-20R	20 Amp 125V Straight GCFI
6241PC	400 Amp 120/208V	4	Pin/Sleeve	100 Amp 120/208V	140
6241PC	Cam Type	2	5-20R	20 Amp 125V Stright GCFI

View Online Catalog

Top of page Top

sales@ameritempltd.com